Disassembling Ibm Thinkpad T42 Lower Bracket Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

3

• Disassembling IBM ThinkPad T42 Rear Cover
• 2 steps
• Keyboard and Trackpad
• 2 steps
• Disassembling IBM ThinkPad T42 Lower Bracket
• 2 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackIBM ThinkPad T42

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom cover               

• Use a Phillips #0 screwdriver to remove the twenty screws on the underside of the T42.

Use a Phillips #0 screwdriver to remove the twenty screws on the underside of the T42.

1024

Step 2

              Rear screws               

• Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)

Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)

Step 3

              Keyboard and Trackpad               

• Flip the laptop over and open the screen to access the keyboard and trackpad.
• The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
• The bezel and keyboard will be loose, be careful.

Flip the laptop over and open the screen to access the keyboard and trackpad.

The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.

The bezel and keyboard will be loose, be careful.

Step 4

• Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
• Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Step 5

              Disassembling IBM ThinkPad T42 Lower Bracket               

• Grasp the metal bracket to remove it from the device.

Grasp the metal bracket to remove it from the device.

Step 6

              Microphone cover               

• Remove the rubber cover from the microphone.

Remove the rubber cover from the microphone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 8 other contributors 

                    Gerald Watanabe                     

Member since: 04/14/2010

279 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 29-76, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 29-76, Johann Spring 2010 



                    CPSU-JOHANN-S10S29G76                     


                                            4 Members                     


                                            35 Guides authored