Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

2

  • Disassembling HTC ONE V Bottom Assembly
  • 4 steps
  • Disassembling HTC One V Back Case
  • 3 steps

Flags

0

  • BackHTC One V

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling HTC ONE V Bottom Assembly
  • Power off your device.
  • Remove the bottom cover by sliding it off.

Power off your device.

Remove the bottom cover by sliding it off.

1024

Step 2

  • Remove the SIM card.
  • Remove the four screws securing the bottom casing.
  • Two 3.0 mm Phillips #0 screws in the top left and right corners.
  • Two 2.0 mm Phillips #0 screws in the bottom left and right corners.

Remove the SIM card.

Remove the four screws securing the bottom casing.

Two 3.0 mm Phillips #0 screws in the top left and right corners.

Two 2.0 mm Phillips #0 screws in the bottom left and right corners.

Step 3

  • Remove the 2.0 mm Phillips #0 screws on either side of the phone.

Remove the 2.0 mm Phillips #0 screws on either side of the phone.

Step 4

  • Use a plastic opening tool to pry open the bottom casing.
  • Remove the bottom casing by pulling it towards you.

Use a plastic opening tool to pry open the bottom casing.

Remove the bottom casing by pulling it towards you.

Step 5

              Disassembling HTC One V Back Case
  • Use the plastic opening tool to pry open the rear camera panel.
  • Remove both screws that are securing the back case.
  • One 4.0 mm Phillips #0 screw.
  • One 3.0 mm Phillips #0 screw.

Use the plastic opening tool to pry open the rear camera panel.

Remove both screws that are securing the back case.

One 4.0 mm Phillips #0 screw.

One 3.0 mm Phillips #0 screw.

Step 6

  • Use a Jimmy to pry up the OEM SIM and SD card reader contact.
  • Pry from right to left to avoid potential damages to the ribbon.

Use a Jimmy to pry up the OEM SIM and SD card reader contact.

Pry from right to left to avoid potential damages to the ribbon.

Step 7

  • Using both thumbs, gently push on the two bottom rear corners of the motherboard.
  • Gently and slowly pull the screen out from the front of the phone, while feeding the OEM reader contact through the opening.

Using both thumbs, gently push on the two bottom rear corners of the motherboard.

Gently and slowly pull the screen out from the front of the phone, while feeding the OEM reader contact through the opening.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 9 other contributors 


                    Michael Lucido

Member since: 01/20/2015

816 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-3, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 1-3, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S1G3                     


                                            4 Members                     


                                            16 Guides authored