Disassembling Ericsson Cf 388 Lcd Display Screen Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Disassembling Ericsson CF 388 Battery
1 step
Phone Casing
3 steps
Keypad Support Skeleton
2 steps
LCD Display Screen
2 steps

Flags

BackEricsson CF 388
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Disassembling Ericsson CF 388 Battery

To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown). The back panel is the same as the battery.
With your index finger, push in the button on the bottom of the battery to release it.
Pull the battery away from the phone.

To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown). The back panel is the same as the battery.

With your index finger, push in the button on the bottom of the battery to release it.

Pull the battery away from the phone.

1024

Step 2

              Phone Casing

After removing the battery, the front phone casing becomes accessible.
Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles.
Remove these two screws using the Torx T6 Screwdriver.

After removing the battery, the front phone casing becomes accessible.

Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles.

Remove these two screws using the Torx T6 Screwdriver.

Step 3

Locate the top two U-shaped screws on the back of the phone, as shown by the red circles.
Remove these two screws with a SP 2.6 screw driver.
Note: Remove gray plastic grommets with screws.

Locate the top two U-shaped screws on the back of the phone, as shown by the red circles.

Remove these two screws with a SP 2.6 screw driver.

Note: Remove gray plastic grommets with screws.

Step 4

Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image.
Note: Be careful not to damage the circuit board and components as you as open the casing.

Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image.

Note: Be careful not to damage the circuit board and components as you as open the casing.

Step 5

              Keypad Support Skeleton

After removing the battery casing and taking apart the phone casing, the keypad is held in with a plastic skeleton structure as shown.

After removing the battery casing and taking apart the phone casing, the keypad is held in with a plastic skeleton structure as shown.

Step 6

To remove the plastic skeleton structure, locate the tab at the top of the phone near the LCD display screen.
Carefully remove the skeleton by holding on the front phone casing with one hand and pull tab with your index finger while having your thumb at the bottom of the phone as shown.

To remove the plastic skeleton structure, locate the tab at the top of the phone near the LCD display screen.

Carefully remove the skeleton by holding on the front phone casing with one hand and pull tab with your index finger while having your thumb at the bottom of the phone as shown.

Step 7

              LCD Display Screen

After removing the plastic support skeleton, the LCD Display is accessible and easily removed.
Locate the screen at the top of the phone as shown.

After removing the plastic support skeleton, the LCD Display is accessible and easily removed.

Locate the screen at the top of the phone as shown.

Step 8

Using your index finger and thumb, carefully remove LCD display screen. You may need to use a plastic pry bar to get this started.

Using your index finger and thumb, carefully remove LCD display screen. You may need to use a plastic pry bar to get this started.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Niccolas Tones

Member since: 03/09/2012

60 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 1-1, Benson Spring 2012                        

                                                  Member of Clemson, Team 1-1, Benson Spring 2012 



                    CLEM-BENSON-S12S1G1                     


                                            3 Members                     


                                            21 Guides authored

What you need#

Team#

What you need

Team