Disassembling Ericsson Cf 388 Circuit Board Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Disassembling Ericsson CF 388 Battery
1 step
Phone Casing
3 steps
Circuit Board
5 steps

Flags

BackEricsson CF 388
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Disassembling Ericsson CF 388 Battery

To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown). The back panel is the same as the battery.
With your index finger, push in the button on the bottom of the battery to release it.
Pull the battery away from the phone.

To remove the battery from the casing, grab the front panel and back panel with opposite hands (as shown). The back panel is the same as the battery.

With your index finger, push in the button on the bottom of the battery to release it.

Pull the battery away from the phone.

1024

Step 2

              Phone Casing

After removing the battery, the front phone casing becomes accessible.
Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles.
Remove these two screws using the Torx T6 Screwdriver.

After removing the battery, the front phone casing becomes accessible.

Locate the two star-shaped T6 screws on the bottom end of the rear of the phone, underneath the battery, as indicated by the red circles.

Remove these two screws using the Torx T6 Screwdriver.

Step 3

Locate the top two U-shaped screws on the back of the phone, as shown by the red circles.
Remove these two screws with a SP 2.6 screw driver.
Note: Remove gray plastic grommets with screws.

Locate the top two U-shaped screws on the back of the phone, as shown by the red circles.

Remove these two screws with a SP 2.6 screw driver.

Note: Remove gray plastic grommets with screws.

Step 4

Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image.
Note: Be careful not to damage the circuit board and components as you as open the casing.

Grab opposite panels of the phone casing and carefully open and pull apart the phone, as shown in the image.

Note: Be careful not to damage the circuit board and components as you as open the casing.

Step 5

              Circuit Board

Locate the circuit board on the rear side of the front phone casing (right side of image).
Locate the mounting screws (indicated by red circles), which attach the board to the rear side of the front phone casing.

Locate the circuit board on the rear side of the front phone casing (right side of image).

Locate the mounting screws (indicated by red circles), which attach the board to the rear side of the front phone casing.

Step 6

Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws. Hold the back part of the screw with the metal tweezers.

Using the SP2.6 u-shaped screw driver in one hand, loosen and remove both center screws. Hold the back part of the screw with the metal tweezers.

Step 7

Completely remove the two center screw as shown.
Note: the hand not holding the screw driver is holding the back part of the screw and the panel in place.

Completely remove the two center screw as shown.

Note: the hand not holding the screw driver is holding the back part of the screw and the panel in place.

Step 8

Locate the final screw at the top of the phone near the antenna, as shown by the red circle.
Using the U-shaped screw driver, remove the top screw.

Locate the final screw at the top of the phone near the antenna, as shown by the red circle.

Using the U-shaped screw driver, remove the top screw.

Step 9

With one hand on the circuit board and one hand on the phone casing, carefully pull apart the circuit board from the front panel casing.

With one hand on the circuit board and one hand on the phone casing, carefully pull apart the circuit board from the front panel casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Niccolas Tones

Member since: 03/09/2012

60 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 1-1, Benson Spring 2012                        

                                                  Member of Clemson, Team 1-1, Benson Spring 2012 



                    CLEM-BENSON-S12S1G1                     


                                            3 Members                     


                                            21 Guides authored

What you need#

Team#

What you need

Team