Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Outer Casing
- 3 steps
Flags
0
BackCoby Kyros MID9742
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Outer Casing
- Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.
Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.
1024
Step 2
- Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.
Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.
Step 3
- Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.
- Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.
- Use caution while prying, do not stick the metal spudger in too far as it may damage internal components
Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.
Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.
Use caution while prying, do not stick the metal spudger in too far as it may damage internal components
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Ian Swett
Member since: 03/11/2015
597 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Colorado Springs, Team 5-3, Panko Spring 2015
Member of Colorado Springs, Team 5-3, Panko Spring 2015
UCCS-PANKO-S15S5G3
3 Members
12 Guides authored