Disassembling Canon Powershot Sd880 Logic Board Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes            

Sections

4

• Back Cover
• 1 step
• Front Cover
• 1 step
• Top Panel
• 1 step
• Logic Board
• 2 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

• BackCanon Powershot SD880

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.
• Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.
• One screw will be located under the rubber USB flap.
• Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.
• Slowly pull the back cover off of the camera.

Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

One screw will be located under the rubber USB flap.

Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

Slowly pull the back cover off of the camera.

1024

Step 2

              Front Cover               

• Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.
• Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.
• The two screws on the other side of the camera were already removed when the back cover was taken off.

Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.

The two screws on the other side of the camera were already removed when the back cover was taken off.

Step 3

              Top Panel               

• Unplug the green and white plugs that connect the top panel to the top of the logic board.
• Dislodge the tab above the lens.
• Dislodge the tab at the back.

Unplug the green and white plugs that connect the top panel to the top of the logic board.

Dislodge the tab above the lens.

Dislodge the tab at the back.

Step 4

              Logic Board               

• Remove 2 screws(1.75mm) using a screwdriver.
• Detach 3 ribbons by pulling up on them. All are on the front of the camera.

Remove 2 screws(1.75mm) using a screwdriver.

Detach 3 ribbons by pulling up on them. All are on the front of the camera.

Step 5

• Remove the newly exposed screw(1.75mm) with screwdriver.
• Unhinge the black tab to slide out the ribbon.
• The only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops out.

Remove the newly exposed screw(1.75mm) with screwdriver.

Unhinge the black tab to slide out the ribbon.

The only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Juan Miguel                     

Member since: 01/13/2011

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team 13-3, Forte Winter 2011                        

                                                  Member of Cal Poly, Team 13-3, Forte Winter 2011 



                    CPSU-FORTE-W11S13G3                     


                                            5 Members                     


                                            8 Guides authored