Disassembling Canon Pixma Mp480 Rear And Side Panel Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          20 - 30 minutes            

Sections

1

• Rear and Side Panel
• 8 steps

Flags

0

• BackCanon Pixma MP480

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear and Side Panel               

• Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

1024

Step 2

• Lift up the back cover to remove it.
• You may need to lift firmly as it requires quite a bit of force.

Lift up the back cover to remove it.

You may need to lift firmly as it requires quite a bit of force.

Step 3

• Open the front tray.

Open the front tray.

Step 4

• Open the scanner compartment.
• Make sure the blue lever locks into place to keep the compartment open.

Open the scanner compartment.

Make sure the blue lever locks into place to keep the compartment open.

Step 5

• Remove the blue lever from its slot by pushing it back and twisting clockwise.
• Close the scanner compartment and cover.

Remove the blue lever from its slot by pushing it back and twisting clockwise.

Close the scanner compartment and cover.

Step 6

• Pry open the side cover with the plastic opening tool.

Pry open the side cover with the plastic opening tool.

Step 7

• Flip the printer over so that you are facing the bottom of the printer.
• Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

Flip the printer over so that you are facing the bottom of the printer.

Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

Step 8

• Use the plastic opening tool to loosen the side panel from the bottom of the printer.

Use the plastic opening tool to loosen the side panel from the bottom of the printer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    Kevin Cole                     

Member since: 01/17/2013

116 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 19-41, Regan Winter 2013                        

                                                  Member of Cal Poly, Team 19-41, Regan Winter 2013 



                    CPSU-REGAN-W13S19G41                     


                                            4 Members                     


                                            6 Guides authored                     

lhitvietnam - Jul 27, 2016

Reply

Good job!!!!

bill roberts - Nov 27, 2021

Reply

Where is the rest of disassembly?