Difficulty

Moderate

Steps

4

Time Required

                          30 seconds

Sections

2

  • Latch Side Cover
  • 2 steps
  • Disassembling Canon EOS Rebel XS Front Cover
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackCanon EOS Rebel XS / 1000D

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Latch Side Cover
  • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

1024

Step 2

  • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
  • Pry up the panel; starting from the front/bottom corner, as indicated.
  • There’s a concealed lip, under the opposite edge.

On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

Pry up the panel; starting from the front/bottom corner, as indicated.

There’s a concealed lip, under the opposite edge.

Step 3

              Disassembling Canon EOS Rebel XS Front Cover
  • Remove three medium length screws from the bottom of the camera

Remove three medium length screws from the bottom of the camera

Step 4

  • Remove the two medium length screws on the front panel of the camera above the lens mount.
  • Once you done, you may use the Spudger to panel from non-grip side.
  • If you start on the grip side, it will be more challenging to loosen the panel.

Remove the two medium length screws on the front panel of the camera above the lens mount.

Once you done, you may use the Spudger to panel from non-grip side.

If you start on the grip side, it will be more challenging to loosen the panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 8 other contributors 


                    Daniel Bussone

Member since: 01/28/2011

1,251 Reputation

                                      11 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 3-41, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 3-41, Regan Winter 2011 



                    CPSU-REGAN-W11S3G41                     


                                            2 Members                     


                                            21 Guides authored

tjt263 - Jun 8, 2017

Reply

This should be labelled: Easy.

Okay, there are several steps missing.