Difficulty
Easy
Steps
4
Time Required
15 minutes
Sections
1
- Case
- 4 steps
Flags
0
BackCambridge Audio A3i
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case
- Remove 2 screws from each side of the amplifier.
Remove 2 screws from each side of the amplifier.
1024
Step 2
- Remove 2 screws on rear of device. Slide top cover up and back from main case.
Remove 2 screws on rear of device. Slide top cover up and back from main case.
Step 3
- Remove 3 screws on bottom of case.
- Remove 13 screws on rear panel.
- Do not move the rear panel too far, as the power cord is still connected.
Remove 3 screws on bottom of case.
Remove 13 screws on rear panel.
Do not move the rear panel too far, as the power cord is still connected.
Step 4
- Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.
- It may require some wiggling, but it should slip out of the hole and then off of the cord.
Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.
It may require some wiggling, but it should slip out of the hole and then off of the cord.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 6 other contributors
Colby
Member since: 04/15/2010
320 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 28-36, Regan Spring 2010
Member of Cal Poly, Team 28-36, Regan Spring 2010
CPSU-REGAN-S10S28G36
4 Members
3 Guides authored
