Disassembling Axis 214 Ptz Camera Repair Guide

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

• Disassembling Axis 214 PTZ Camera
• 10 steps

Flags

4

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackAXIS 213 PTZ Network Camera

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembling Axis 214 PTZ Camera               

• 4 screws

4 screws

1024

Step 2

• 7 screws

7 screws

Step 3

• Remove (4) Phillips screws.
• Carefully disconnect the ribbon connector.

Remove (4) Phillips screws.

Carefully disconnect the ribbon connector.

Step 4

• Remove (4) Phillips screws.
• If replacing the logic board, remove (2) cables at the connectors.
• At the underside of the logic board, disconnect the connector.

If replacing the logic board, remove (2) cables at the connectors.

At the underside of the logic board, disconnect the connector.

Step 5

• Gently press back the plastic clip at both sides.
• Remove 2 screws.
• Remove (3) Phillip screws.

Gently press back the plastic clip at both sides.

Remove 2 screws.

Remove (3) Phillip screws.

Step 6

              Odključitev heada               

• Remove (4) Phillips screws.
• Carefully disconnect ribbon and flex cables.

Carefully disconnect ribbon and flex cables.

Step 7

• Remove (2) Phillip screws.
• Remove (1) protective clip.

Remove (2) Phillip screws.

Remove (1) protective clip.

Step 8

• Remove 2 screws one on each side.
• Turn the latch mechanism to the right.

Remove 2 screws one on each side.

Turn the latch mechanism to the right.

Step 9

• It is difficult to disassemble.

It is difficult to disassemble.

Step 10

• Remove (4) recessed screws.
• Disconnect flat Ribbon Cable.

Remove (4) recessed screws.

Disconnect flat Ribbon Cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    lukahlastec                     

Member since: 06/02/2011

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges