Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Outer Case
- 4 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackApple AirPort Extreme Model A1034
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Outer Case
- Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
1024
Step 2
- Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
Step 3
- Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.
Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.
Step 4
- Unplug the black connector on the top of the metal casing by gently pulling horizontally.
Unplug the black connector on the top of the metal casing by gently pulling horizontally.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 7 other contributors
Travis Go
Member since: 10/12/2011
158 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 17-15, Regan Fall 2011
Member of Cal Poly, Team 17-15, Regan Fall 2011
CPSU-REGAN-F11S17G15
3 Members
13 Guides authored