Digitech Rp70 Footswitch Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          2 - 5 minutes            

Sections

2

• Motherboard
• 4 steps
• Footswitches
• 2 steps

Flags

0

• BackDigiTech RP70

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.
• Remove the four 8mm Phillips #0 screws located on the back panel.

Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.

Remove the four 8mm Phillips #0 screws located on the back panel.

1024

Step 2

• Remove the back panel to expose the motherboard.

Remove the back panel to expose the motherboard.

Step 3

• Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

Step 4

• Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

Step 5

              Footswitches               

• Pull firmly on the binder clips that are holding the footswitches in place to remove them.
• To get the binder clips back in place, you will need to attach handles from another binder clip to hold them open.

Pull firmly on the binder clips that are holding the footswitches in place to remove them.

To get the binder clips back in place, you will need to attach handles from another binder clip to hold them open.

Step 6

• Pull the footswitch down and upwards to remove it from the casing.

Pull the footswitch down and upwards to remove it from the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Elijah Smith                     

Member since: 09/10/2018

726 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Appalachian State University, Team S2-G2, Menagarishvili Fall 2018                        

                                                  Member of Appalachian State University, Team S2-G2, Menagarishvili Fall 2018 



                    APSU-MENAGARISHVILI-F18S2G2                     


                                            3 Members                     


                                            6 Guides authored                     

Carl - Mar 29, 2021

Reply

So what is the fix? Replacing both foot switches with new ones? Or removing them and reinstalling them will fix the problem of them not working at all? What’s Step 7? If you stop after completing Step 6 you now just have a casing without foot switches. What will fix the problem of them not working qt all after removing the foot switches?