Difficulty

Easy

Steps

8

Time Required

                          3 - 6 minutes

Sections

2

  • External Cover
  • 3 steps
  • Volume Buttons
  • 5 steps

Flags

0

  • BackDigital2 Platinum Pad 9

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              External Cover
  • Take the plastic opening tool and insert it into the crease between the screen and the plastic casing and press down.

Take the plastic opening tool and insert it into the crease between the screen and the plastic casing and press down.

1024

Step 2

  • After inserting the plastic opening tool, run it around the device a few times to loosen the external cover.

After inserting the plastic opening tool, run it around the device a few times to loosen the external cover.

Step 3

  • Once you’ve gone around a few times a corner will pop up, insert the opening tool there and repeat step 2 with slightly more pressure. Do this until every section of the backing has popped up.
  • Then just remove the backing.

Once you’ve gone around a few times a corner will pop up, insert the opening tool there and repeat step 2 with slightly more pressure. Do this until every section of the backing has popped up.

Then just remove the backing.

Step 4

              Volume Buttons
  • You can locate the volume buttons on one of the longer sides of the tablet.

You can locate the volume buttons on one of the longer sides of the tablet.

Step 5

  • Lift up the ZIF connector that is attached to the volume buttons ribbon cable.

Lift up the ZIF connector that is attached to the volume buttons ribbon cable.

Step 6

  • Then remove the ribbon cable from the ZIF connector.

Then remove the ribbon cable from the ZIF connector.

Step 7

  • Make sure to separate the volume button’s cable from the cable connecting the motherboard to the screen

Make sure to separate the volume button’s cable from the cable connecting the motherboard to the screen

Step 8

  • Then use the precision tweezers to grab the volume buttons.
  • Pull until the buttons come out.

Then use the precision tweezers to grab the volume buttons.

Pull until the buttons come out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    David DeMeritt

Member since: 03/08/2016

637 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 5-6, Landers Spring 2016                        

                                                  Member of UMass Dartmouth, Team 5-6, Landers Spring 2016 



                    UMASSD-LANDERS-S16S5G6                     


                                            3 Members                     


                                            6 Guides authored