Difficulty

Moderate

Steps

5

Time Required

                          30 minutes

Sections

2

  • External Cover
  • 2 steps
  • Screen
  • 3 steps

Flags

1

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackDigital2 D2-912

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              External Cover
  • Remove the two Phillips #00 screws from the bottom of the case.

Remove the two Phillips #00 screws from the bottom of the case.

1024

Step 2

  • Wedge the opening tool in the space between the back and the front of the tablet.
  • Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.
  • When the back of the tablet is mostly detached from the front, carefully pull it away completely.

Wedge the opening tool in the space between the back and the front of the tablet.

Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.

When the back of the tablet is mostly detached from the front, carefully pull it away completely.

Step 3

              Screen
  • Be sure to remove the yellow tape that is holding the components down.
  • Locate the two yellow ribbon cables and carefully remove by lifting the black tab connectors forward and slide out ribbon.
  • When all components are unsecured, you will be able to remove the battery, motherboard, camera, and speaker out of the way.

Be sure to remove the yellow tape that is holding the components down.

Locate the two yellow ribbon cables and carefully remove by lifting the black tab connectors forward and slide out ribbon.

When all components are unsecured, you will be able to remove the battery, motherboard, camera, and speaker out of the way.

Step 4

  • Using the metal spudger, pry the display from the screen.

Using the metal spudger, pry the display from the screen.

Step 5

  • The screen is now ready to be replaced by the new one

The screen is now ready to be replaced by the new one

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Lindsay Richardson

Member since: 09/16/2015

394 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       IUPUI, Team 1-1, Harley Fall 2015                        

                                                  Member of IUPUI, Team 1-1, Harley Fall 2015 



                    IUPUI-HARLEY-F15S1G1                     


                                            4 Members                     


                                            6 Guides authored

Dr. Wolfgang Mohr - Jul 24, 2017

Reply

Dear Lindsay,

thank you for the guide how to open up that little thing!

Apparently I have fried it after I had mislaid the charger and used my

universal charger without checking the voltage: 8 instead of 5… If only

I had used my reading glasses.

Is there something like a fuse that I could repair/exchange?

Thank you for your help!

Respectfully,

Wolfgang

Super Manny - Sep 2, 2017

Reply

Thanks for the help, I am just curious where I can get the new screen, I believe that the front glass is fine but the actual display I am pretty sure is not.

Rocia Patrick - Aug 14, 2020

Reply

This website right here. Straight trash,basically So you have a broken tablet. You come to the website to get help to replace it. And it’s no help at all. This is what I think about this hot mass right here