Difficulty

Moderate

Steps

6

Time Required

                          50 minutes

Sections

2

  • External Cover
  • 2 steps
  • Motherboard
  • 4 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackDigital2 D2-912

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              External Cover
  • Remove the two Phillips #00 screws from the bottom of the case.

Remove the two Phillips #00 screws from the bottom of the case.

1024

Step 2

  • Wedge the opening tool in the space between the back and the front of the tablet.
  • Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.
  • When the back of the tablet is mostly detached from the front, carefully pull it away completely.

Wedge the opening tool in the space between the back and the front of the tablet.

Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.

When the back of the tablet is mostly detached from the front, carefully pull it away completely.

Step 3

              Motherboard
  • Remove the wires shown in the image, using a soldering iron and solder sucker.
  • By removing the wires, you are detaching the battery and speaker from the motherboard.

Remove the wires shown in the image, using a soldering iron and solder sucker.

By removing the wires, you are detaching the battery and speaker from the motherboard.

Step 4

  • Use the Phillips #00 screwdriver to remove the three screws from motherboard.

Use the Phillips #00 screwdriver to remove the three screws from motherboard.

Step 5

  • Detach the capacitive touch controller from the motherboard.
  • Carefully pry the narrow black connector upward to release the ribbon.
  • Remove the ribbon from the connector.

Detach the capacitive touch controller from the motherboard.

Carefully pry the narrow black connector upward to release the ribbon.

Remove the ribbon from the connector.

Step 6

  • Locate the camera found in the image.
  • Carefully pry the black connector upward to release ribbon.
  • Remove the black tape to release the camera from the motherboard.
  • Remove the ribbon from the connector.
  • Remove and replace the motherboard.

Locate the camera found in the image.

Carefully pry the black connector upward to release ribbon.

Remove the black tape to release the camera from the motherboard.

Remove and replace the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Jason Wignot

Member since: 09/16/2015

322 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       IUPUI, Team 1-1, Harley Fall 2015                        

                                                  Member of IUPUI, Team 1-1, Harley Fall 2015 



                    IUPUI-HARLEY-F15S1G1                     


                                            4 Members                     


                                            6 Guides authored