Difficulty
Moderate
Steps
3
Time Required
30 minutes
Sections
2
- External Cover
- 2 steps
- Camera Module
- 1 step
Flags
0
BackDigital2 D2-912
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
External Cover
- Remove the two Phillips #00 screws from the bottom of the case.
Remove the two Phillips #00 screws from the bottom of the case.
1024
Step 2
- Wedge the opening tool in the space between the back and the front of the tablet.
- Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.
- When the back of the tablet is mostly detached from the front, carefully pull it away completely.
Wedge the opening tool in the space between the back and the front of the tablet.
Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.
When the back of the tablet is mostly detached from the front, carefully pull it away completely.
Step 3
Camera Module
- Peel the black tape back and pull the black tab back (the tab should come up, not slide).
- The camera module should then easily come out. Insert your replacement module.
Peel the black tape back and pull the black tab back (the tab should come up, not slide).
The camera module should then easily come out. Insert your replacement module.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Jason Wignot
Member since: 09/16/2015
322 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
IUPUI, Team 1-1, Harley Fall 2015
Member of IUPUI, Team 1-1, Harley Fall 2015
IUPUI-HARLEY-F15S1G1
4 Members
6 Guides authored
