Difficulty

Difficult

Steps

2

Time Required

                          30 - 45 minutes

Sections

1

  • Speaker
  • 2 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missed a Step

Oops! This guide is currently missing some important steps.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigital2 7" Tablet D2-713G GN

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Opening the device to expose components
  • With the appropriate tools on hand, you want to look for the charging port.
  • Once you have located your charging port, to the right of it you will be able to insert the prying tool into the crack between the case and the display border.
  • Now continue to pry the case with the same technique all around.
  • After prying all around the device, you will be able to separate the back cover from the display , which holds all the components.

With the appropriate tools on hand, you want to look for the charging port.

Once you have located your charging port, to the right of it you will be able to insert the prying tool into the crack between the case and the display border.

Now continue to pry the case with the same technique all around.

After prying all around the device, you will be able to separate the back cover from the display , which holds all the components.

1024

Step 2

              Locating and replacing the speaker
  • Once you have opened the case completely, you will be able to see the speaker.
  • With one hand hold the device down to the table and with the other hand remove the speaker from where it sits.
  • Follow the black and red wires to the circuit board.
  • The wires will have to be removed with a soldering tool.
  • This process is also needed when installing the new speaker.

Once you have opened the case completely, you will be able to see the speaker.

With one hand hold the device down to the table and with the other hand remove the speaker from where it sits.

Follow the black and red wires to the circuit board.

The wires will have to be removed with a soldering tool.

This process is also needed when installing the new speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Miguel A Rodriguez

Member since: 10/25/2014

590 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Gateway, Team 1-6, Johnson Fall 2014                        

                                                  Member of Gateway, Team 1-6, Johnson Fall 2014 



                    GCC-JOHNSON-F14S1G6                     


                                            2 Members                     


                                            4 Guides authored