Digital2 7 Tablet D2 713G Gn Camera Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 - 40 minutes

Sections

Camera Assembly
2 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

BackDigital2 7" Tablet D2-713G GN
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Camera Assembly

With the appropriate tools on hand, you want to look for the charging port.
Once you have located your charging port, to the right of it you will be able to insert the prying tool into the crack between the case and the display border.
Now continue to pry the case with the same technique all around.
After prying all around the device, you will be able to separate the back cover from the display , which holds all the components.

With the appropriate tools on hand, you want to look for the charging port.

Once you have located your charging port, to the right of it you will be able to insert the prying tool into the crack between the case and the display border.

Now continue to pry the case with the same technique all around.

After prying all around the device, you will be able to separate the back cover from the display , which holds all the components.

1024

Step 2

Once you have opened the case completely, you will be able to see the front and back facing cameras.
With your tweezers, carefully lift the cameras out of their place. the cameras are held together by a ribbon cable. Be careful not to damage the ribbon when pulling the cameras out.
Now that the speakers are out of their place, you will need to disconnect the ribbon connector from the circuit board.
When all of the previous steps have been completed, you will be able to install the new cameras into your device.

Once you have opened the case completely, you will be able to see the front and back facing cameras.

With your tweezers, carefully lift the cameras out of their place. the cameras are held together by a ribbon cable. Be careful not to damage the ribbon when pulling the cameras out.

Now that the speakers are out of their place, you will need to disconnect the ribbon connector from the circuit board.

When all of the previous steps have been completed, you will be able to install the new cameras into your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Miguel A Rodriguez

Member since: 10/25/2014

590 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Gateway, Team 1-6, Johnson Fall 2014                        

                                                  Member of Gateway, Team 1-6, Johnson Fall 2014 



                    GCC-JOHNSON-F14S1G6                     


                                            2 Members                     


                                            4 Guides authored

Slice and Dice#

Introduction#

What you need#

#

#

#

#

Team#

#

Slice and Dice

Introduction

What you need

Team