Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes

Sections

1

  • Speaker
  • 6 steps

Flags

4

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigiLand DL8006

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Begin by opening the device around its edge using the iFixit opening tool.

Begin by opening the device around its edge using the iFixit opening tool.

1024

Step 2

  • Remove the metallic tape that covers the lower section of the battery.

Remove the metallic tape that covers the lower section of the battery.

Step 3

  • Remove the three battery screws using a Phillips #0 screwdriver.

Remove the three battery screws using a Phillips #0 screwdriver.

Step 4

  • Pop up the locking tab of the ZIF connector using tweezers, and carefully pull the cable out from the motherboard.
  • Make sure the ribbon passes under the microphone wiring to avoid damage to the components.
  • Remove the lower section of the ribbon cable repeating the previous bullet.

Pop up the locking tab of the ZIF connector using tweezers, and carefully pull the cable out from the motherboard.

Make sure the ribbon passes under the microphone wiring to avoid damage to the components.

Remove the lower section of the ribbon cable repeating the previous bullet.

Step 5

  • Remove the battery from the phone using the iFixit opening tool or the spudger.

Remove the battery from the phone using the iFixit opening tool or the spudger.

Step 6

  • Finally, remove the speaker from the tablet using the spudger.
  • In this image, a screwdriver was used to pry the speaker from its housing. You should use an ESD-safe tool to avoid causing damage to your device.

Finally, remove the speaker from the tablet using the spudger.

In this image, a screwdriver was used to pry the speaker from its housing. You should use an ESD-safe tool to avoid causing damage to your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Alec Trela

Member since: 10/30/2019

327 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Memphis, Team S2-G5, Kim Fall 2019                        

                                                  Member of University of Memphis, Team S2-G5, Kim Fall 2019 



                    UM-KIM-F19S2G5                     


                                            3 Members                     


                                            5 Guides authored