Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

1

  • LCD Screen
  • 8 steps

Flags

5

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigiLand DL8006

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Screen
  • Place the device laying down on its front with the back facing upwards.
  • Use a plastic opening tool to pry the front and back faces apart exposing the internal mechanisms.
  • Remove the silver/metallic tape on the lower end of the tablet.

Place the device laying down on its front with the back facing upwards.

Use a plastic opening tool to pry the front and back faces apart exposing the internal mechanisms.

Remove the silver/metallic tape on the lower end of the tablet.

1024

Step 2

  • Remove the red & black cord connecting the motherboard and the bottom end of the tablet.
  • Remove the ribbon cable running over the battery by prying the locking tab of the ZIF connector up and then pulling the cable from the connector.

Remove the red & black cord connecting the motherboard and the bottom end of the tablet.

Remove the ribbon cable running over the battery by prying the locking tab of the ZIF connector up and then pulling the cable from the connector.

Step 3

  • Remove the red & black cord connecting the motherboard and the camera, on the upper end of the tablet.
  • Remove the red & blue cord connecting the battery to the motherboard.
  • Remove the tape connecting the back of the LED screen and the motherboard.

Remove the red & black cord connecting the motherboard and the camera, on the upper end of the tablet.

Remove the red & blue cord connecting the battery to the motherboard.

Remove the tape connecting the back of the LED screen and the motherboard.

Step 4

  • Remove the cable connecting the motherboard to the left side of the tablet.
  • Remove both cables connecting the camera to the motherboard.

Remove the cable connecting the motherboard to the left side of the tablet.

Remove both cables connecting the camera to the motherboard.

Step 5

  • Remove the screw on the left corner of the motherboard with a Phillips #0 screwdriver.
  • Remove the screw under the ribbon cable with a Phillips #0 screwdriver.
  • Remove the screw on the top of the motherboard with a Phillips #0 screwdriver.

Remove the screw on the left corner of the motherboard with a Phillips #0 screwdriver.

Remove the screw under the ribbon cable with a Phillips #0 screwdriver.

Remove the screw on the top of the motherboard with a Phillips #0 screwdriver.

Step 6

  • Remove the motherboard and place it aside.

Remove the motherboard and place it aside.

Step 7

  • Remove the screw anchoring the LED screen down in the top right of the tablet with a Phillips #0 screwdriver.
  • Remove the screw anchoring the LED screen down in the bottom right of the tablet with a Phillips #0 screwdriver.
  • Remove the screw anchoring the LED screen down in the bottom left of the tablet with a Phillips #0 screwdriver.

Remove the screw anchoring the LED screen down in the top right of the tablet with a Phillips #0 screwdriver.

Remove the screw anchoring the LED screen down in the bottom right of the tablet with a Phillips #0 screwdriver.

Remove the screw anchoring the LED screen down in the bottom left of the tablet with a Phillips #0 screwdriver.

Step 8

  • Use an opening tool to pry the LCD screen and screen apart.
  • Remove the battery by using an opening tool or by ripping off the tape, on the upper and lower end of the battery.

Use an opening tool to pry the LCD screen and screen apart.

Remove the battery by using an opening tool or by ripping off the tape, on the upper and lower end of the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Landon Choi

Member since: 10/30/2019

379 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Memphis, Team S2-G5, Kim Fall 2019                        

                                                  Member of University of Memphis, Team S2-G5, Kim Fall 2019 



                    UM-KIM-F19S2G5                     


                                            3 Members                     


                                            5 Guides authored