Digiland Dl8006 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 - 9 minutes

Sections

Battery
3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Better Introduction

Improve this guide by completing or revising its introduction.

BackDigiLand DL8006
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Place the device down on its front with the back facing upward.
Split the two faces of the device with a plastic opening tool to pry the back cover off.
Remove the silver/metallic tape covering the bottom end of the tablet.

Place the device down on its front with the back facing upward.

Split the two faces of the device with a plastic opening tool to pry the back cover off.

Remove the silver/metallic tape covering the bottom end of the tablet.

1024

Step 2

Remove the red & black wire that connects the motherboard to the bottom end of the tablet.
Remove the ribbon cable over the battery by flipping up the plastic tab on the ZIF connector on either side of the cable and pulling it out.

Remove the red & black wire that connects the motherboard to the bottom end of the tablet.

Remove the ribbon cable over the battery by flipping up the plastic tab on the ZIF connector on either side of the cable and pulling it out.

Step 3

Remove the red & blue cord connecting the battery to the motherboard.
Remove the tape connecting the motherboard to the back of the LED screen.
Pry open with a plastic opening tool along the top and bottom edges until the battery is free from the device.
Remove all the remaining tape from the battery.
It may be helpful to remove the motherboard prior to prying the battery out for better leverage on the edges.

Remove the red & blue cord connecting the battery to the motherboard.

Remove the tape connecting the motherboard to the back of the LED screen.

Pry open with a plastic opening tool along the top and bottom edges until the battery is free from the device.

Remove all the remaining tape from the battery.

It may be helpful to remove the motherboard prior to prying the battery out for better leverage on the edges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Landon Choi

Member since: 10/30/2019

379 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Memphis, Team S2-G5, Kim Fall 2019                        

                                                  Member of University of Memphis, Team S2-G5, Kim Fall 2019 



                    UM-KIM-F19S2G5                     


                                            3 Members                     


                                            5 Guides authored

Needs Better Images#

Missing Prerequisites#

Better Introduction#

Introduction#

What you need#

#

#

#

#

#

Team#

#