Digiland Dl718M Camera Lens Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

2

• Back Panel
• 1 step
• Camera Lens
• 3 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackDigiLand DL718M

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Both the front-facing camera and rear-facing camera are attached to each other and to the motherboard; thus, if one lens is failing, both lenses will need to be replaced using the steps in this guide.

This process requires you to remove the back panel of the device and thus expose the motherboard. Be careful when working with an exposed motherboard as you could damage it, if it comes into contact with moisture. It is motion sensitive, and small aspects can be easily jostled out of place.

Before beginning, power the tablet off and disconnect it from any external power source.

What you need

Step 1

              Back Panel               

• Remove back panel by wedging the iFixit opening tool on all four sides of the device.

Remove back panel by wedging the iFixit opening tool on all four sides of the device.

1024

Step 2

              Camera Lens               

• Lift up the black tab on the motherboard using an opening tool, and slide the ribbon out of the slot beneath the black tab.

Lift up the black tab on the motherboard using an opening tool, and slide the ribbon out of the slot beneath the black tab.

Step 3

• Remove the front-facing camera by sliding it out of its slot in the corner of the device using an opening tool.

Remove the front-facing camera by sliding it out of its slot in the corner of the device using an opening tool.

Step 4

• Remove the rear-facing camera by prying it off the internal panel using an opening tool.

Remove the rear-facing camera by prying it off the internal panel using an opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Alayna Knarian                     

Member since: 10/15/2019

734 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Grand Valley State University, Team S4-G4, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S4-G4, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S4G4                     


                                            4 Members                     


                                            6 Guides authored