Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

2

  • Battery
  • 5 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackDigiLand DL700D

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the device’s back cover using the plastic opening tool.

Remove the device’s back cover using the plastic opening tool.

1024

Step 2

  • Remove the three pieces of adhesive placed over the edges of the battery.

Remove the three pieces of adhesive placed over the edges of the battery.

Step 3

  • Remove the wifi antenna from the bottom of the battery.

Remove the wifi antenna from the bottom of the battery.

Step 4

  • Heat up the soldering iron, proceed to desolder and remove the battery connections.

Heat up the soldering iron, proceed to desolder and remove the battery connections.

Step 5

  • Remove the battery from the casing using a nylon spudger.
  • Be careful not to puncture the battery casing.
  • Carefully peel the battery free from the casing.

Remove the battery from the casing using a nylon spudger.

Be careful not to puncture the battery casing.

Carefully peel the battery free from the casing.

Step 6

              Motherboard
  • Desolder the WiFi antenna from the motherboard.

Desolder the WiFi antenna from the motherboard.

Step 7

  • Remove 3 ribbon cables attached to the motherboard by lifting the plastic retainer, then pulling the cable out.

Remove 3 ribbon cables attached to the motherboard by lifting the plastic retainer, then pulling the cable out.

Step 8

  • Remove adhesive attaching the motherboard to the casing.

Remove adhesive attaching the motherboard to the casing.

Step 9

  • Remove the three 2.5 mm Phillips #1 screws holding the motherboard to the case.

Remove the three 2.5 mm Phillips #1 screws holding the motherboard to the case.

Step 10

  • Remove motherboard from the case and replace.

Remove motherboard from the case and replace.

To reassemble, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Justin Edwards

Member since: 03/29/2018

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S3-G4, Harley Spring 2018                        

                                                  Member of IUPUI, Team S3-G4, Harley Spring 2018 



                    IUPUI-HARLEY-S18S3G4                     


                                            3 Members                     


                                            4 Guides authored