Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackDigiLand DL700D
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the device’s back cover using the plastic opening tool.
Remove the device’s back cover using the plastic opening tool.
1024
Step 2
- Remove the three pieces of adhesive placed over the edges of the battery.
Remove the three pieces of adhesive placed over the edges of the battery.
Step 3
- Remove the wifi antenna from the bottom of the battery.
Remove the wifi antenna from the bottom of the battery.
Step 4
- Heat up the soldering iron, proceed to desolder and remove the battery connections.
Heat up the soldering iron, proceed to desolder and remove the battery connections.
Step 5
- Remove the battery from the casing using a nylon spudger.
- Be careful not to puncture the battery casing.
- Carefully peel the battery free from the casing.
Remove the battery from the casing using a nylon spudger.
Be careful not to puncture the battery casing.
Carefully peel the battery free from the casing.
To reassemble your device, follow instructions in the reverse order. Apply new Kapton Tape and apply extra solder as needed.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Justin Edwards
Member since: 03/29/2018
241 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S3-G4, Harley Spring 2018
Member of IUPUI, Team S3-G4, Harley Spring 2018
IUPUI-HARLEY-S18S3G4
3 Members
4 Guides authored
