Difficulty
Very easy
Steps
3
Time Required
5 minutes
Sections
1
- Rear Case
- 3 steps
Flags
0
BackDigiland DL1168A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.
- Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.
Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.
Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.
1024
Step 2
- Carefully lift back panel away from the body of the device.
- Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.
Carefully lift back panel away from the body of the device.
Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.
Step 3
- Desolder the four wires connecting the rear case to the motherboard.
- Disconnect the wires from the motherboard.
- Remove the rear case from the device.
Desolder the four wires connecting the rear case to the motherboard.
Disconnect the wires from the motherboard.
Remove the rear case from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Ryan Barker
Member since: 10/15/2019
217 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Grand Valley State University, Team S1-G1, DeVasto Fall 2019
Member of Grand Valley State University, Team S1-G1, DeVasto Fall 2019
GVSU-DEVASTO-F19S1G1
4 Members
4 Guides authored
