Digiland Dl1168A Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

Rear Case
3 steps
Motherboard
4 steps

Flags

BackDigiland DL1168A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Case

Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.
Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.

Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.

Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.

1024

Step 2

Carefully lift back panel away from the body of the device.
Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

Carefully lift back panel away from the body of the device.

Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

Step 3

Desolder the four wires connecting the rear case to the motherboard.
Disconnect the wires from the motherboard.
Remove the rear case from the device.

Desolder the four wires connecting the rear case to the motherboard.

Disconnect the wires from the motherboard.

Remove the rear case from the device.

Step 4

              Motherboard

Using a pair of tweezers, carefully lift the three zero insertion force connectors (ZIF) attached to the motherboard.

Using a pair of tweezers, carefully lift the three zero insertion force connectors (ZIF) attached to the motherboard.

Step 5

Using the soldering iron, desolder all eight wires connected to the motherboard.
Removing the red wire then the black wire (2 wires).
Desolder the three wires and remove them.
Remove the single grey wire.
Remove the yellow and red twisted wires and black and red twisted wires connected to the speakers.

Using the soldering iron, desolder all eight wires connected to the motherboard.

Removing the red wire then the black wire (2 wires).

Desolder the three wires and remove them.

Remove the single grey wire.

Remove the yellow and red twisted wires and black and red twisted wires connected to the speakers.

Step 6

Remove the four 4mm Phillips #00 screws attached to the motherboard.

Remove the four 4mm Phillips #00 screws attached to the motherboard.

Step 7

Gently lift and remove the motherboard using the iFixit opening tool.

Gently lift and remove the motherboard using the iFixit opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Katelyn Wilkerson

Member since: 10/15/2019

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Grand Valley State University, Team S1-G1, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S1-G1, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S1G1                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team