Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Rear Case
  • 3 steps
  • Front/Rear Camera
  • 3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigiland DL1168A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.
  • Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.

Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.

Continue prying the edges while moving around the device’s perimeter until the back can be easily removed.

1024

Step 2

  • Carefully lift back panel away from the body of the device.
  • Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

Carefully lift back panel away from the body of the device.

Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

Step 3

  • Desolder the four wires connecting the rear case to the motherboard.
  • Disconnect the wires from the motherboard.
  • Remove the rear case from the device.

Desolder the four wires connecting the rear case to the motherboard.

Disconnect the wires from the motherboard.

Remove the rear case from the device.

Step 4

              Front/Rear Camera
  • Use tweezers to remove the cover that keeps the camera lens in place.

Use tweezers to remove the cover that keeps the camera lens in place.

Step 5

  • Use tweezers to gently begin to lift the back piece off.
  • Lift gently because the lens is connected to the back piece by a small cord.

Use tweezers to gently begin to lift the back piece off.

Lift gently because the lens is connected to the back piece by a small cord.

Step 6

  • After lifting gently both the lens and the back piece will be removed.

After lifting gently both the lens and the back piece will be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Payton Boshears

Member since: 10/15/2019

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Grand Valley State University, Team S1-G1, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S1-G1, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S1G1                     


                                            4 Members                     


                                            4 Guides authored