Difficulty

Moderate

Steps

8

Time Required

                          30 minutes

Sections

5

  • Digiland 10.1’’ DL1016 Remove Backing
  • 2 steps
  • Digiland 10.1’’ DL1016 Disconnect Wires going off the Motherboard
  • 1 step
  • Digiland 10.1’’ DL1016 Remove Battery
  • 1 step
  • Power Button
  • 2 steps
  • Screen
  • 2 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigiland 10.1’’ DL1016

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Digiland 10.1'' DL1016 Remove Backing
  • Use an opening pick and an opening tool to pry the backing off the back of the tablet.
  • You may need some force when doing this and if needed use a metal spudger.

Use an opening pick and an opening tool to pry the backing off the back of the tablet.

You may need some force when doing this and if needed use a metal spudger.

1024

Step 2

  • Gently lift the backing off.

Gently lift the backing off.

Step 3

              Digiland 10.1'' DL1016 Disconnect Wires going off the Motherboard
  • Gently pull the wiring back.
  • You may need to use a metal spudger to lift the wire connector off the back of the screen.

Gently pull the wiring back.

You may need to use a metal spudger to lift the wire connector off the back of the screen.

Step 4

              Digiland 10.1'' DL1016 Remove Battery
  • Use an ESD safe pryer to lift the battery up.
  • There is glue that holds the battery down, so carefully pry it open. You may need to use some force.

Use an ESD safe pryer to lift the battery up.

There is glue that holds the battery down, so carefully pry it open. You may need to use some force.

Step 5

              Power Button
  • Disconnect the black cable off the motherboard.
  • Remove the four 1.5mm Phillips #000 screws from the motherboard.

Disconnect the black cable off the motherboard.

Remove the four 1.5mm Phillips #000 screws from the motherboard.

Step 6

  • Make sure the ribbon cables are free or unconnected so the motherboard is able to be moved.
  • Use a metal spudger to slide underneath the motherboard and push it up so it’s unstuck from the tablet.
  • Lift up the motherboard and place it somewhere that is clean and kept safe.

Make sure the ribbon cables are free or unconnected so the motherboard is able to be moved.

Use a metal spudger to slide underneath the motherboard and push it up so it’s unstuck from the tablet.

Lift up the motherboard and place it somewhere that is clean and kept safe.

Step 7

              Screen
  • Remove the tape from the backside of the tablet along with the wiring.
  • Make space so you can pry the motherboard away from the digitizer.

Remove the tape from the backside of the tablet along with the wiring.

Make space so you can pry the motherboard away from the digitizer.

Step 8

  • Once the motherboard is pulled away, the screen should be free of all other components.
  • Check around the edges so that no tape is stuck to the edges or wiring and just push off digitizer and replace screen if needed.

Once the motherboard is pulled away, the screen should be free of all other components.

Check around the edges so that no tape is stuck to the edges or wiring and just push off digitizer and replace screen if needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Virginia Tapia

Member since: 08/26/2019

386 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Gateway, Team S1-G2, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G2, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G2                     


                                            4 Members                     


                                            5 Guides authored

Arivu Alagan - Mar 19, 2022

Reply

Where can i get the screen for this tablet? i need to order online and currently i am in india.

Josphat Mutai - May 4, 2022

Reply

Where will I get screen in kenya

My phone crack,I need screen only