Difficulty

Difficult

Steps

7

Time Required

                          40 minutes

Sections

5

  • Digiland 10.1’’ DL1016 Remove Backing
  • 2 steps
  • Digiland 10.1’’ DL1016 Disconnect LCD Connectors
  • 1 step
  • Digiland 10.1’’ DL1016 Disconnect Wires going off the Motherboard
  • 1 step
  • Power Button
  • 2 steps
  • Motherboard
  • 1 step

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDigiland 10.1’’ DL1016

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Digiland 10.1'' DL1016 Remove Backing
  • Use an opening pick and an opening tool to pry the backing off the back of the tablet.
  • You may need some force when doing this and if needed use a metal spudger.

Use an opening pick and an opening tool to pry the backing off the back of the tablet.

You may need some force when doing this and if needed use a metal spudger.

1024

Step 2

  • Gently lift the backing off.

Gently lift the backing off.

Step 3

              Digiland 10.1'' DL1016 Disconnect LCD Connectors
  • Pull back the black flaps on the ZIF cable connectors.
  • Pull the ribbon cables out of the connectors.

Pull back the black flaps on the ZIF cable connectors.

Pull the ribbon cables out of the connectors.

Step 4

              Digiland 10.1'' DL1016 Disconnect Wires going off the Motherboard
  • Gently pull the wiring back.
  • You may need to use a metal spudger to lift the wire connector off the back of the screen.

Gently pull the wiring back.

You may need to use a metal spudger to lift the wire connector off the back of the screen.

Step 5

              Power Button
  • Disconnect the black cable off the motherboard.
  • Remove the four 1.5mm Phillips #000 screws from the motherboard.

Disconnect the black cable off the motherboard.

Remove the four 1.5mm Phillips #000 screws from the motherboard.

Step 6

  • Make sure the ribbon cables are free or unconnected so the motherboard is able to be moved.
  • Use a metal spudger to slide underneath the motherboard and push it up so it’s unstuck from the tablet.
  • Lift up the motherboard and place it somewhere that is clean and kept safe.

Make sure the ribbon cables are free or unconnected so the motherboard is able to be moved.

Use a metal spudger to slide underneath the motherboard and push it up so it’s unstuck from the tablet.

Lift up the motherboard and place it somewhere that is clean and kept safe.

Step 7

              Motherboard
  • Once you have followed all steps simply replace the motherboard to fix your RAM

Once you have followed all steps simply replace the motherboard to fix your RAM

To reassemble your device, follow these instructions in reverse order. When following the Prerequisite Guide for Replacing the Power Button ONLY go to step 7.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Virginia Tapia

Member since: 08/26/2019

386 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Gateway, Team S1-G2, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G2, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G2                     


                                            4 Members                     


                                            5 Guides authored