Difficulty

Easy

Steps

12

Time Required

                          5 minutes

Sections

1

  • Motor
  • 12 steps

Flags

3

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCorded Belt Sander Dexter - 900BS2.5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Unplug
  • Before you begin, remember to disconnect the mains plug.

Before you begin, remember to disconnect the mains plug.

1024

Step 2

  • Remove the handle, by unscrewing the screw.

Remove the handle, by unscrewing the screw.

Step 3

  • Pry the tape off.

Pry the tape off.

Step 4

  • Unscrew the 4 screws.

Unscrew the 4 screws.

Step 5

  • Remove the belt, then unscrew the screws of the shell to gain access to the motor.
  • Collect the belt to place it in the new room.

Remove the belt, then unscrew the screws of the shell to gain access to the motor.

Collect the belt to place it in the new room.

Step 6

  • Remove both accessories.

Remove both accessories.

Step 7

  • Remove the screws from the hull in order to have access to the interior and allow the carbon brushes to be blocked.

Remove the screws from the hull in order to have access to the interior and allow the carbon brushes to be blocked.

Step 8

  • Relax the small metal strip to be able to separate the carbons.

Relax the small metal strip to be able to separate the carbons.

Step 9

  • Replace the new part in its housing.

Replace the new part in its housing.

Step 10

  • Open the cap of the new part to replace the belt.
  • Tighten the inner screw.

Open the cap of the new part to replace the belt.

Tighten the inner screw.

Step 11

  • Tighten the four screws.

Tighten the four screws.

Step 12

  • Replace the tip, band and handle.

Replace the tip, band and handle.

Cancel: I did not complete this guide.

        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 1 other contributor 


                    Céline Chemineau

Member since: 01/29/2020

16,042 Reputation

                                      95 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Leroy Merlin                        

                                                  Member of Leroy Merlin 



                    Community                     


                                            36 Members                     


                                            223 Guides authored