Difficulty

Moderate

Steps

10

Time Required

                          5 minutes

Sections

1

  • Power cable cable
  • 10 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCorded jigsaw Dexter 750W - 750JS3-100.5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Unplug
  • Before starting, remember to disconnect the outlet from the mains.

Before starting, remember to disconnect the outlet from the mains.

1024

Step 2

  • Remove the vacuum adaptor on the back of the device.

Remove the vacuum adaptor on the back of the device.

Step 3

  • Using a screwdriver or screwdriver, unscrew and open the device.
  • Unlock the tray by lifting the lever.

Using a screwdriver or screwdriver, unscrew and open the device.

Unlock the tray by lifting the lever.

Step 4

  • Remove the two screws to unlock the cable.

Remove the two screws to unlock the cable.

Step 5

  • Remove the black screw, in order to remove the wheel.

Remove the black screw, in order to remove the wheel.

Step 6

  • Thanks to a screwdriver, leverage to be able to recover the wheel.

Thanks to a screwdriver, leverage to be able to recover the wheel.

Step 7

  • Turn the switch over.
  • Unscrew the 2 screws to remove the blue and brown cables.

Turn the switch over.

Unscrew the 2 screws to remove the blue and brown cables.

Step 8

  • Reconnect the new cable.
  • The brown thread must be at the top and the blue thread must be at the bottom.

Reconnect the new cable.

The brown thread must be at the top and the blue thread must be at the bottom.

Step 9

  • Reposition each room in its housing.
  • Then screw each screw.

Reposition each room in its housing.

Then screw each screw.

Step 10

  • Close and screw the device.

Close and screw the device.

Cancel: I did not complete this guide.

        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 1 other contributor 


                    Céline Chemineau

Member since: 01/29/2020

16,042 Reputation

                                      95 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Leroy Merlin                        

                                                  Member of Leroy Merlin 



                    Community                     


                                            36 Members                     


                                            223 Guides authored