Difficulty

Easy

Steps

13

Time Required

                          5 minutes

Sections

1

  • Carbon
  • 13 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPonceuse Vibrante Filaire Dexter 330W - 330SHS2.5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unplug
  • Before starting, remember to disconnect the outlet from the mains.

Before starting, remember to disconnect the outlet from the mains.

1024

Step 2

  • Remove the dust case and the seal on the back of the device.

Remove the dust case and the seal on the back of the device.

Step 3

  • Unscrew the six screws from the pad.
  • Lock the motor with a screwdriver to be able to unscrew the centre screw, you will not be able to get there without blocking the gear.

Unscrew the six screws from the pad.

Lock the motor with a screwdriver to be able to unscrew the centre screw, you will not be able to get there without blocking the gear.

Step 4

  • Using a screwdriver or screwdriver, unscrew and open the device.

Using a screwdriver or screwdriver, unscrew and open the device.

Step 5

  • Lift the two coals with a screwdriver to get them out of their homes.

Lift the two coals with a screwdriver to get them out of their homes.

Step 6

  • Press the tab to disconnect the carbon from the engine

Press the tab to disconnect the carbon from the engine

Step 7

  • Remove the coals from the coal door.
  • Then put the new ones inside.

Remove the coals from the coal door.

Then put the new ones inside.

Step 8

  • Using a screwdriver, lift the connecter tab before reconnecting it.

Using a screwdriver, lift the connecter tab before reconnecting it.

Step 9

  • Reconnect the carbon and check that they hold well.

Reconnect the carbon and check that they hold well.

Step 10

  • Put the two coals back in their homes.

Put the two coals back in their homes.

Step 11

  • Replace the shell, then screw it back on.
  • Remember to put the joint back in its place.

Replace the shell, then screw it back on.

Remember to put the joint back in its place.

Step 12

  • Reposition the part, then lock the engine with a screwdriver to screw.
  • Put the tray back on and screw the screws.

Reposition the part, then lock the engine with a screwdriver to screw.

Put the tray back on and screw the screws.

Step 13

  • Finally, reposition the vacuum bag.

Finally, reposition the vacuum bag.

Cancel: I did not complete this guide.

        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 1 other contributor 


                    Céline Chemineau

Member since: 01/29/2020

16,042 Reputation

                                      95 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Leroy Merlin                        

                                                  Member of Leroy Merlin 



                    Community                     


                                            36 Members                     


                                            223 Guides authored