Difficulty
Easy
Steps
8
Time Required
5 minutes
Sections
1
- Carbon
- 8 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDexter 2100W corded angle grinder - 2100AG2-230.5
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unplug
- Before starting, remember to disconnect the outlet from the mains.
Before starting, remember to disconnect the outlet from the mains.
1024
Step 2
- To begin, remove the side handle and the protective cover.
To begin, remove the side handle and the protective cover.
Step 3
- Unscrew the screw to access the inside.
Unscrew the screw to access the inside.
Step 4
- Using a screwdriver, relax the blade springs.
Using a screwdriver, relax the blade springs.
Step 5
- With a clamp remove the linch and then remove the carbon.
With a clamp remove the linch and then remove the carbon.
Step 6
- Insert the carbon and put the spring back in place.
Insert the carbon and put the spring back in place.
Step 7
- Then reconnect the carbon
Then reconnect the carbon
Step 8
- And finally close the machine.
And finally close the machine.
Cancel: I did not complete this guide.
HelloMacOS is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
HelloMacOS
Author
with 1 other contributor
Céline Chemineau
Member since: 01/29/2020
16,042 Reputation
95 Guides authored
Badges:
11
+8 more badges
Team
Leroy Merlin
Member of Leroy Merlin
Community
36 Members
223 Guides authored
