Difficulty

Easy

Steps

9

Time Required

                          5 minutes

Sections

1

  • Switch
  • 9 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackRéparation Ponceuse Vibrante Filaire Dexter 200W - 200SHS2.5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unplug
  • Before you begin, remember to disconnect the mains plug.

Before you begin, remember to disconnect the mains plug.

1024

Step 2

  • Unscrew the four screws from the tray.
  • Then the four screws inside the tray.

Unscrew the four screws from the tray.

Then the four screws inside the tray.

Step 3

  • Unscrew the screws of the shell to open the machine.

Unscrew the screws of the shell to open the machine.

Step 4

  • Remove the orange switch cap for more space.

Remove the orange switch cap for more space.

Step 5

  • Use pliers to disconnect the wires from the switch. Press the tab to extract it.

Use pliers to disconnect the wires from the switch. Press the tab to extract it.

Step 6

  • Replace the new switch, then reconnect the wires.
  • Replace the sheath, then check that no cable is blocked and that each part is in its housing.

Replace the new switch, then reconnect the wires.

Replace the sheath, then check that no cable is blocked and that each part is in its housing.

Step 7

  • Replace the orange cap.

Replace the orange cap.

Step 8

  • Before closing, check that no cable is blocked and that each part is in its place.
  • Replace the shell and screws.

Before closing, check that no cable is blocked and that each part is in its place.

Replace the shell and screws.

Step 9

  • Replace the four screws located inside.
  • Then the screws of the plate.

Replace the four screws located inside.

Then the screws of the plate.

To reassemble perform steps in reverse.

Cancel: I did not complete this guide.

        HelloMacOS is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

HelloMacOS

Author

                                      with 1 other contributor 


                    Céline Chemineau

Member since: 01/29/2020

16,042 Reputation

                                      95 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Leroy Merlin                        

                                                  Member of Leroy Merlin 



                    Community                     


                                            36 Members                     


                                            223 Guides authored