Difficulty

Difficult

Steps

12

Time Required

Suggest a time??

Sections

4

  • Display and Front Bezel
  • 2 steps
  • Charging Port
  • 3 steps
  • Motherboard
  • 3 steps
  • Speaker
  • 4 steps

Flags

3

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackDexcom G5/G6 Receiver

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Display and Front Bezel
  • Unscrew the 6 Torx T5 screws from the back of the device

Unscrew the 6 Torx T5 screws from the back of the device

1024

Step 2

  • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

Step 3

              Charging Port
  • Using a spudger, unplug the Charging Port connector from the motherboard.

Using a spudger, unplug the Charging Port connector from the motherboard.

Step 4

  • Remove the 2 silver Torx T5 screws holding the charging port down.

Remove the 2 silver Torx T5 screws holding the charging port down.

Step 5

  • Remove the Charging Port Assembly from the motherboard.

Remove the Charging Port Assembly from the motherboard.

Step 6

              Motherboard
  • Remove the silver Torx T5 screw holding the motherboard down.

Remove the silver Torx T5 screw holding the motherboard down.

Step 7

  • Using a spudger, carefully remove the battery connector on the left side of the motherboard.

Using a spudger, carefully remove the battery connector on the left side of the motherboard.

Step 8

  • Using a spudger, carefully pry up the motherboard to remove it.

Using a spudger, carefully pry up the motherboard to remove it.

Step 9

              Speaker
  • Using a spudger, carefully pry up and remove the speaker at the top.

Using a spudger, carefully pry up and remove the speaker at the top.

Step 10

  • Remove any remaining adhesive.

Remove any remaining adhesive.

Step 11

  • Put down new adhesive tape(be careful not to let it get in the way of the speaker).

Put down new adhesive tape(be careful not to let it get in the way of the speaker).

Step 12

  • Stick the new speaker down.

Stick the new speaker down.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Andrew S

Member since: 07/30/2021

12,903 Reputation

                                      9 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges