Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Display and Front Bezel
- 2 steps
- Charging Port
- 3 steps
- Motherboard
- 3 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDexcom G5/G6 Receiver
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Display and Front Bezel
- Unscrew the 6 Torx T5 screws from the back of the device
Unscrew the 6 Torx T5 screws from the back of the device
1024
Step 2
- Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.
Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.
Step 3
Charging Port
- Using a spudger, unplug the Charging Port connector from the motherboard.
Using a spudger, unplug the Charging Port connector from the motherboard.
Step 4
- Remove the 2 silver Torx T5 screws holding the charging port down.
Remove the 2 silver Torx T5 screws holding the charging port down.
Step 5
- Remove the Charging Port Assembly from the motherboard.
Remove the Charging Port Assembly from the motherboard.
Step 6
Motherboard
- Remove the silver Torx T5 screw holding the motherboard down.
Remove the silver Torx T5 screw holding the motherboard down.
Step 7
- Using a spudger, carefully remove the battery connector on the left side of the motherboard.
Using a spudger, carefully remove the battery connector on the left side of the motherboard.
Step 8
- Using a spudger, carefully pry up the motherboard to remove it.
Using a spudger, carefully pry up the motherboard to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Andrew S
Member since: 07/30/2021
12,903 Reputation
9 Guides authored
Badges:
24
+21 more badges
