Dexcom G6 Receiver Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Display and Front Bezel
• 2 steps
• Charging Port
• 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDexcom G5/G6 Receiver

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Display and Front Bezel               

• Unscrew the 6 Torx T5 screws from the back of the device

Unscrew the 6 Torx T5 screws from the back of the device

1024

Step 2

• Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

Step 3

              Charging Port               

• Using a spudger, unplug the Charging Port connector from the motherboard.

Using a spudger, unplug the Charging Port connector from the motherboard.

Step 4

• Remove the 2 silver Torx T5 screws holding the charging port down.

Remove the 2 silver Torx T5 screws holding the charging port down.

Step 5

• Remove the Charging Port Assembly from the motherboard.

Remove the Charging Port Assembly from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Andrew S                     

Member since: 07/30/2021

12,903 Reputation

                                      9 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Mayor of Koala Corner - Sep 30, 2022

Reply

Where can the part be purchased?

Andrew S - Oct 1, 2022

I’m not sure if there is a replacement charging port assembly available online. If you’re good at microsoldering, you could replace the surface mount micro USB port on the assembly.

where can the part be purchased?

Ron Magliacane - Nov 28, 2022

Reply

would a cell phone repair shop be able to do this?

Andrew S - Nov 28, 2022

If they are comfortable with it. Tell them it will probably require microsoldering.