Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

1

  • Power Switch
  • 6 steps

Flags

0

  • BackDeWalt DWE4011

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Switch
  • Turn to the bottom of the device and remove the 1 1/4" screw shown using a T15 Torx Screwdriver.

Turn to the bottom of the device and remove the 1 1/4" screw shown using a T15 Torx Screwdriver.

1024

Step 2

  • Remove the outer casing by pulling the end handle away from the field case.

Remove the outer casing by pulling the end handle away from the field case.

Step 3

  • Unscrew the pin that is holding the main power cord in place and remove the cord.

Unscrew the pin that is holding the main power cord in place and remove the cord.

Step 4

  • Pull back the tab holding the switch box in place using a nylon spudger. There is one on top and bottom shown in the image.

Pull back the tab holding the switch box in place using a nylon spudger. There is one on top and bottom shown in the image.

Step 5

  • Remove the switch box entirely from its normal position. Gently pull off the connections from the switch box to the motor.

Remove the switch box entirely from its normal position. Gently pull off the connections from the switch box to the motor.

Step 6

  • Using a small Phillips head screwdriver, remove the screws that hold the white colored wires from the power cord in place.

Using a small Phillips head screwdriver, remove the screws that hold the white colored wires from the power cord in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Kory Dalesky

Member since: 04/04/2019

318 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019                        

                                                  Member of Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019 



                    OIT-LANCASTER-S19S2G9                     


                                            4 Members                     


                                            5 Guides authored