Difficulty

Moderate

Steps

6

Time Required

                          15 - 35 minutes

Sections

2

  • Speed Switch
  • 4 steps
  • Motor
  • 2 steps

Flags

0

  • BackDeWalt DW997

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speed Switch
  • Remove seven 21 mm Torx T15 screws.
  • Remove one 18 mm Torx T10 screw.
  • After removing all screws, lift up the top yellow cover.
  • The yellow cover should easily lift up, if not, check for unscrewed screws.
  • Do not pry the two yellow covers apart, they can crack.

Remove seven 21 mm Torx T15 screws.

Remove one 18 mm Torx T10 screw.

After removing all screws, lift up the top yellow cover.

The yellow cover should easily lift up, if not, check for unscrewed screws.

Do not pry the two yellow covers apart, they can crack.

1024

Step 2

  • Lift the components out of the casing. These include: motor, gear assembly, trigger assembly and chuck.

Lift the components out of the casing. These include: motor, gear assembly, trigger assembly and chuck.

Step 3

  • Using the tweezers, grab the metal leg on either side of the switch and lift it outwards from the case.

Using the tweezers, grab the metal leg on either side of the switch and lift it outwards from the case.

Step 4

  • Remove the other leg manually, it should easily come out.

Remove the other leg manually, it should easily come out.

Step 5

              Motor
  • Use a Torx T10 screw bit to remove the four 11mm screws around the motor.

Use a Torx T10 screw bit to remove the four 11mm screws around the motor.

Step 6

  • Pull off the two wires that connect the motor to the trigger.
  • Be careful while pulling the wires as they can tear.

Pull off the two wires that connect the motor to the trigger.

Be careful while pulling the wires as they can tear.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Kevin

Member since: 09/12/2016

140 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Western Carolina University, Team 1-2, Virtue Fall 2016                        

                                                  Member of Western Carolina University, Team 1-2, Virtue Fall 2016 



                    WCU-VIRTUE-F16S1G2                     


                                            4 Members                     


                                            8 Guides authored