Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

2

  • Plastic Cover
  • 6 steps
  • Trigger
  • 4 steps

Flags

0

  • BackDeWalt DW936

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Plastic Cover
  • Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

1024

Step 2

  • Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

Step 3

  • Remove Allen Key.

Remove Allen Key.

Step 4

  • Unscrew the black plastic knob underneath the trigger.

Unscrew the black plastic knob underneath the trigger.

Step 5

  • Grab hold of the black air filter portion and pull off.

Grab hold of the black air filter portion and pull off.

Step 6

  • This is what the inside of the saw looks like.

This is what the inside of the saw looks like.

Step 7

              Trigger
  • The trigger has black and white wires coming off of it. Grip the trigger with both hands, one on the plastic trigger part and the other on the plastic by the silver metal piece.
  • Pull up.

The trigger has black and white wires coming off of it. Grip the trigger with both hands, one on the plastic trigger part and the other on the plastic by the silver metal piece.

Pull up.

Step 8

  • The trigger should be able to sit freely.

The trigger should be able to sit freely.

Step 9

  • Lift off the silver metal piece using tweezers.
  • Lift off each hook. (4 corners)

Lift off the silver metal piece using tweezers.

Lift off each hook. (4 corners)

Step 10

  • Pull plastic trigger out of the black plastic casing.

Pull plastic trigger out of the black plastic casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Scott Weinhardt

Member since: 01/25/2017

564 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 8-2, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 8-2, Banghart Winter 2017 



                    CPSU-BANGHART-W17S8G2                     


                                            3 Members                     


                                            5 Guides authored

donald.mcguinnes - Jul 2, 2017

Reply

Then repair trigger by stripping,cleaning,soldering and whatever else before replacing to unit as you can no longer buy the part as it is obsolete!