Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
1
- Plastic Cover
- 6 steps
Flags
0
BackDeWalt DW936
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Plastic Cover
- Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.
Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.
1024
Step 2
- Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.
Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.
Step 3
- Remove Allen Key.
Remove Allen Key.
Step 4
- Unscrew the black plastic knob underneath the trigger.
Unscrew the black plastic knob underneath the trigger.
Step 5
- Grab hold of the black air filter portion and pull off.
Grab hold of the black air filter portion and pull off.
Step 6
- This is what the inside of the saw looks like.
This is what the inside of the saw looks like.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Scott Weinhardt
Member since: 01/25/2017
564 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 8-2, Banghart Winter 2017
Member of Cal Poly, Team 8-2, Banghart Winter 2017
CPSU-BANGHART-W17S8G2
3 Members
5 Guides authored
