Dewalt Dcs380 Grip Disassembly Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          5 minutes            

Sections

1

• DeWalt DCS380 Grip Disassembly
• 2 steps

Flags

0

• BackDeWalt DCS380

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              DeWalt DCS380 Grip Disassembly               

• Remove the battery before dissasembly.
• Remove the M3x16mm T10 screw from the back of the grip. Keep it separate from the rest of the grip screws
• Remove the six M3.63x19 T15 screws from the grip.

Remove the battery before dissasembly.

Remove the M3x16mm T10 screw from the back of the grip. Keep it separate from the rest of the grip screws

Remove the six M3.63x19 T15 screws from the grip.

1024

Step 2

• Remove the top half of the grip.
• Turn the saw over and locate the power connectors to the motor.
• Use needle nose pliers to remove the spade connectors. Take care not to grab the wires on removal, only the end of the spade terminal.
• Note the polarity for the power connectors and be sure they are not reversed on reassembly.

Remove the top half of the grip.

Turn the saw over and locate the power connectors to the motor.

Use needle nose pliers to remove the spade connectors. Take care not to grab the wires on removal, only the end of the spade terminal.

Note the polarity for the power connectors and be sure they are not reversed on reassembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Jonathan Hicks                     

Member since: 01/17/2019

725 Reputation

                                      7 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Eastern Washington University, Team S2-G5, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G5, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G5                     


                                            3 Members                     


                                            7 Guides authored