Difficulty

Easy

Steps

6

Time Required

                          4 - 5 minutes

Sections

2

  • Battery
  • 2 steps
  • Motor Assembly
  • 4 steps

Flags

0

  • BackDewalt DCF885

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The motor assembly uses battery power to spin the chuck. A faulty motor will cause the Impact Driver to not work, have little power, or produce smoke when it’s being used.

Before using this guide, use this troubleshooting guide to make sure that the motor is the faulty part. Be sure that the battery is removed before fixing the Impact Driver.

What you need

Step 1

              Battery
  • Press the battery release button at the top of the battery.

Press the battery release button at the top of the battery.

1024

Step 2

  • Pull the battery away from the tool.

Pull the battery away from the tool.

Step 3

              Motor Assembly
  • Remove the eight 18 mm Torx Security #10 screws.

Remove the eight 18 mm Torx Security #10 screws.

Step 4

  • Separate the two halves of the outer case. Set the empty side down and out of the way.

Separate the two halves of the outer case. Set the empty side down and out of the way.

Step 5

  • Disconnect the connector from the motor assembly.

Disconnect the connector from the motor assembly.

Step 6

  • Pull the motor away from the brush assembly.

Pull the motor away from the brush assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Will

Member since: 01/29/2019

315 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       South Arkansas Community College, Team S1-G1, Mitchell Spring 2019                        

                                                  Member of South Arkansas Community College, Team S1-G1, Mitchell Spring 2019 



                    SACC-MITCHELL-S19S1G1                     


                                            4 Members                     


                                            10 Guides authored