Difficulty

Moderate

Steps

8

Time Required

                          30 - 45 minutes

Sections

2

  • Battery
  • 3 steps
  • Motor
  • 5 steps

Flags

0

  • BackDeWalt DCD778

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

1024

Step 2

  • Use your other hand to push down on the yellow button on the battery.

Use your other hand to push down on the yellow button on the battery.

Step 3

  • Pull the battery in a horizontal direction away from the drill.

Pull the battery in a horizontal direction away from the drill.

Step 4

              Motor
  • Remove the eight 16 mm, Torx Security #15 screws.

Remove the eight 16 mm, Torx Security #15 screws.

Step 5

  • Lay the drill on its side and gently lift the top half off it.

Lay the drill on its side and gently lift the top half off it.

Step 6

  • Lift the drill mechanism out of the shell.
  • Desolder the red and black wires from the motor.

Lift the drill mechanism out of the shell.

Desolder the red and black wires from the motor.

Step 7

  • Slightly twist and pull motor away from the clutch.

Slightly twist and pull motor away from the clutch.

Step 8

  • When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.

When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Brittany

Member since: 03/09/2019

657 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Casper College, Team S1-G5, Lareau Spring 2019                        

                                                  Member of Casper College, Team S1-G5, Lareau Spring 2019 



                    CASC-LAREAU-S19S1G5                     


                                            4 Members                     


                                            5 Guides authored