Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
3
- Battery
- 2 steps
- Drill Assembly
- 2 steps
- Clutch
- 2 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackDeWalt DC970
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Compress the buttons on either side of the battery and lift the drill away from battery.
Compress the buttons on either side of the battery and lift the drill away from battery.
1024
Step 2
- Remove battery from drill.
Remove battery from drill.
Step 3
Drill Assembly
- Remove the eight 16 mm, Torx Security #15 screws.
Remove the eight 16 mm, Torx Security #15 screws.
Step 4
- Lay the drill on its side and gently lift the top half off it.
Lay the drill on its side and gently lift the top half off it.
Step 5
Clutch
- Lift drill mechanism from the drill assembly.
Lift drill mechanism from the drill assembly.
Step 6
- Twist slightly and pull clutch away from motor.
- Remove clutch.
Twist slightly and pull clutch away from motor.
Remove clutch.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Jonathan Hamel
Member since: 03/10/2016
579 Reputation
4 Guides authored
Badges:
15
+12 more badges
Team
UMass Dartmouth, Team 4-2, Catania Spring 2016
Member of UMass Dartmouth, Team 4-2, Catania Spring 2016
UMASSD-CATANIA-S16S4G2
3 Members
13 Guides authored
bowlweevil - Apr 8, 2020
Reply
worthless no info about clutch
