Difficulty
Moderate
Steps
3
Time Required
15 minutes
Sections
1
- Battery Fuse
- 3 steps
Flags
0
BackDeWalt DC970
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Fuse
- Remove the four 13 mm, Torx Security #15 screws found on the bottom of the charger.
Remove the four 13 mm, Torx Security #15 screws found on the bottom of the charger.
1024
Step 2
- Remove the 19 mm, Torx Security #10 screw found in the charger port.
- Then pull the top of the charger off separating it from the bottom.
Remove the 19 mm, Torx Security #10 screw found in the charger port.
Then pull the top of the charger off separating it from the bottom.
Step 3
- Locate the fuse and pull it out with two fingers.
- Once you have located the fuse, if you have the replacement fuse just pull the old one out and put the new one in.
- Replacement fuses can be found in hardware stores.
Locate the fuse and pull it out with two fingers.
Once you have located the fuse, if you have the replacement fuse just pull the old one out and put the new one in.
Replacement fuses can be found in hardware stores.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Antonia Thomas
Member since: 03/09/2016
303 Reputation
1 Guide authored
Badges:
12
+9 more badges
Team
UMass Dartmouth, Team 4-2, Catania Spring 2016
Member of UMass Dartmouth, Team 4-2, Catania Spring 2016
UMASSD-CATANIA-S16S4G2
3 Members
13 Guides authored
bigboyf232 - Oct 9, 2016
Reply
Can i get some help in locating the fuse in mt dcb 112 dewalt battery charger i cant found it
