Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Battery Cells
- 3 steps
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackDeWalt DC970
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Compress the buttons on either side of the battery and lift the drill away from battery.
Compress the buttons on either side of the battery and lift the drill away from battery.
1024
Step 2
- Remove battery from drill.
Remove battery from drill.
Step 3
Battery Cells
- Remove the six 19 mm, Torx Security 15 screws from the top of the battery.
Remove the six 19 mm, Torx Security 15 screws from the top of the battery.
Step 4
- Pull off the battery cover, exposing the battery cells.
- Be careful to not damage the batteries, if damaged they may explode.
Pull off the battery cover, exposing the battery cells.
Be careful to not damage the batteries, if damaged they may explode.
Step 5
- Remove the old battery cells by slowly pulling them out of the top piece of the battery.
- The best is to recycle the old battery cells.
Remove the old battery cells by slowly pulling them out of the top piece of the battery.
The best is to recycle the old battery cells.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Jonathan Hamel
Member since: 03/10/2016
579 Reputation
4 Guides authored
Badges:
15
+12 more badges
Team
UMass Dartmouth, Team 4-2, Catania Spring 2016
Member of UMass Dartmouth, Team 4-2, Catania Spring 2016
UMASSD-CATANIA-S16S4G2
3 Members
13 Guides authored
