Dewalt D28110 Pinion Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

• Disassembling DeWalt D28110 Gear Case
• 2 steps
• Pinion
• 4 steps

Flags

0

• BackDeWalt D28110

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembling DeWalt D28110 Gear Case               

• Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.
• Unplug the grinder before any disassembly.

Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.

Unplug the grinder before any disassembly.

1024

Step 2

• Pull out the gear case.

Pull out the gear case.

Step 3

              Pinion               

• Using the T-15 screwdriver, remove the four torx screws.

Using the T-15 screwdriver, remove the four torx screws.

Step 4

• Remove the gear case cover from the gear case.

Remove the gear case cover from the gear case.

Step 5

• Using a 10-mm wrench, remove the hex nut by rotating counter-clockwise.

Using a 10-mm wrench, remove the hex nut by rotating counter-clockwise.

Step 6

• Remove the armature assembly from the gear case.
• Remove the pinion from the armature assembly.

Remove the armature assembly from the gear case.

Remove the pinion from the armature assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Will Young                     

Member since: 02/05/2015

251 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 18-6, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 18-6, Maness Winter 2015 



                    CPSU-MANESS-W15S18G6                     


                                            5 Members                     


                                            7 Guides authored