Difficulty

Moderate

Steps

3

Time Required

                          6 minutes

Sections

1

  • Fan
  • 3 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell XPS 9720

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove back cover
  • Unscrew 8 T5 screws. Use an opening tool to pop open the plastic tabs holding the aluminum and carbon fiber shells together.

Unscrew 8 T5 screws. Use an opening tool to pop open the plastic tabs holding the aluminum and carbon fiber shells together.

1024

Step 2

              Disconnect battery
  • Insert finger into plastic loop and pull firmly away from motherboard.

Insert finger into plastic loop and pull firmly away from motherboard.

Step 3

              Remove fan
  • Gently unplug the fan connector.
  • Remove the two PH1 (red) and single PH00 (blue) screws.
  • The fan may now be lifted from the chassis. Reverse these steps to install the new fan.

Gently unplug the fan connector.

Remove the two PH1 (red) and single PH00 (blue) screws.

The fan may now be lifted from the chassis. Reverse these steps to install the new fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Sebastien Bolle

Member since: 09/12/2015

326 Reputation

                                      3 Guides authored                  



                       Badges:
                       3