Difficulty
Moderate
Steps
7
Time Required
10 minutes
Sections
2
- Back Cover
- 3 steps
- Support Feet
- 4 steps
Flags
0
BackDell XPS 18
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Turn the device on its screen.
- Remove the ten 4mm screws using a T8 Torx screwdriver.
Turn the device on its screen.
Remove the ten 4mm screws using a T8 Torx screwdriver.
1024
Step 2
- Gently flip out support feet located near the bottom of device.
Gently flip out support feet located near the bottom of device.
Step 3
- Gently lift the back cover off the device. The back cover should come off easily.
Gently lift the back cover off the device. The back cover should come off easily.
Step 4
Support Feet
- Fold down the support foot.
Fold down the support foot.
Step 5
- Remove the two silver 3mm screws with a Phillips 00 screwdriver.
Remove the two silver 3mm screws with a Phillips 00 screwdriver.
Step 6
- Remove the silver metal piece holding the support feet down.
Remove the silver metal piece holding the support feet down.
Step 7
- Remove the support foot.
- Follow these same steps for the remaining support foot.
Remove the support foot.
Follow these same steps for the remaining support foot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Austin Weir
Member since: 01/31/2015
1,263 Reputation
8 Guides authored
Badges:
18
+15 more badges
Team
Cal Poly, Team 6-29, Amido Winter 2015
Member of Cal Poly, Team 6-29, Amido Winter 2015
CPSU-AMIDO-W15S6G29
4 Members
16 Guides authored
